Friday, January 9, 2009

The Music Stand

A simpler and lighter version of Winged Music Stand.

The top of the music stand moves up and down on a curved stem. The height varies about 300mm (12"). There are stops every 8mm (3/8"). A stainless steel, delrin tipped plunger allows simple height adjustment. The top tilts from nearly horizontal to 80°. The tray is 65mm (2 1/2") wide - enough to hold a binder full of music. It will hold sheet music open at three folds. The angle of the top is adjusted by loosening and tightening the hinge bolts with an allen key. The allen key can be stored under the tray on two embedded rare earth magnets.

Maximum Height: 1290mm (51")
Minimum Height: 1070mm (42")
Width: 610mm (24")
Depth: 385mm (15")
Ash and Cherry with Walnut inlay

Hand rubbed oil / varnish mixture to 600 grit

No comments: